Ruby Tech GS-2124C Manual de usuario descargar pdf (Pagina 58)

GS-2124C User Manual

Publication date: June, 2005

Revision A1

Mode:

Set the speed and duplex of the port. In speed, if the media is 1Gbps

fiber, it is always 1000Mbps and the duplex is full only. If the media is TP,

the Speed/Duplex is comprised of the combination of speed mode,

10/100/1000Mbps, and duplex mode, full duplex and half duplex. The

following table summarized the function the media supports.

Media type NWay Speed Duplex

1000M TP ON/OFF 10/100/1000M Full for all, Half for 10/100

1000M Fiber ON/OFF 1000M Full

In Auto-negotiation mode, no default value. In Forced mode, default

value depends on your setting.

Flow Control:

There are two modes to choose in flow control, including Enable and

Disable. If flow control is set Enable, both parties can send PAUSE frame

to the transmitting device(s) if the receiving port is too busy to handle.

When it is set Disable, there will be no flow control in the port. It drops

the packet if too much to handle.

Default: Enable.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 266 267

Sin comentarios

Ruby Tech GS-2124C Manual de usuario Pagina 58